Rubber Inner Tube Recycling EPT,Rubber PowEPTProduction Line

I. Attribute
1. Waste tire recycling program is used to shred waste tire into rubber powder.
two. Procedure Stream:
Squander tire–Ring cutter –Strips cutter–Rim cutter –Crushing EPT–Completed products
three. Processing Approach:
Physic mechanical crushing strategy at regular temperature of squander tire, no chemical raw material is required, no waste gasoline, squander water and soot are discharged, and the cooling water of the tools is reused, no emission, products sounds is inside of the variety specified by the region(GB20055-2006), fineness of rubber powEPTproduced by it is adjustable(ten to thirty meshes). The approach is as follows: Breaking down, crushing, filtering, magnetic separating, grinding and then be concluded.

II. Complex Parameter of Each and every EPT
1. Ring cutter:
It will individual the sidewall from the best of tire’s link, so that tire sidewall and the prime are completely separated.
two. Strips cutter:
It will reduce sidewall into wide of strips is three-five cm, and tire circle reserved.
3. Rim cutter:
It will cut the three-5cm strips into 3.5cm tire block.
four. Steel wire separator
It will independent the steel and rubber from tire circle mouth parts.
five. Linear vibrating monitor: It will classify the rubber powEPTfor initial time
Conveyor EPT: Use to transportation not up needed measurement re-again to tire shredEPTEPT
Magnetic technique: It can classify slim metal from rubber powder
PowEPTscreen: Second time to classify rubber powder
six. Tire shredder
It will reduce three.5cm block into 10-thirty mesh size rubber powder.
Our EPT can offer with .65-1.4m tires, and the EPT line want three-four personnel to run.
The place requirement is at least 15m duration *8m width *6m top.
The EPT can make the powEPTinto ten -thirty mesh.

We have a few types of Model XKP400/450/560.
XKP400 150kg per hour
XKP450 300kg for each hour
XKP560 500kg per hour

III. Some generation method details:
one. This Tyre Recycling EPT incXiHu (West Lake) Dis.Hu (West Lake) Dis. major EPT and accessorial equipment, it is used for recycling scrap-tire (steel tyre and textile tyre), the final merchandise is rubber powEPTor reclaimed rubber
2. The magnet separator and granulator grinEPTis optional.
3. The investment decision on this manufacturing line is tiny and the footprint is small. It is effortless to run, only need to have five personnel.
4. Examination for output
(1) XKP400 rubber crusher:
Output: 5000-6500kg/24 hour for about 28 mesh granule.
(two) XKP450 rubber crusher:
Output: 8000-9500kg/24 hour for about 28 mesh granule.
(3) XKP560 rubber crusher:
Output: 11000-13500kg/24 hour for about 28 mesh granule.
5. You don`t need the Granulator GrinEPTif your closing rubber powEPTis considerably less than 30 mesh. But we require it if the powEPTbigger than thirty mesh and the variety of this EPT count on the output.

Our organization creates a complete established of squander tyre recycling EPT, which is utilized to make rubber powEPTfrom old tyre, like rail tyre, engmeenng tyre and other previous tires. It can generate 20 – eighty mesh rubber powder.

III. Photo display